Design with the measurements you know
Your room measurements might be in metres, while your plot is described in feet. Choose the units that help you picture the space, enter sizes, and explain the design to someone else.
Choose m or ft in the top bar
Use the m | ft switch beside Edit and Explore. Choose m for metres, square metres, and cubic metres, or ft for feet and inches, square feet, and cubic feet. In Edit mode, U also switches units when you are not typing in a field or tracing an outline.
The same home stays on screen: switching does not resize it, move objects, or use a generation. Metres is the default, but your browser can remember a different choice for an unsaved scene.
Choose before tracing an outline
Switching units with the top-bar control discards an unfinished Draw outline. Finish the outline first, or choose your unit before you begin.
Type feet and inches directly
With ft selected, use the length fields to enter the size you know. Press Enter or leave the field to apply it. These examples describe the same 12-foot-6-inch length:
| Type | How it is read |
|---|---|
| 12' 6" | 12 feet and 6 inches. |
| 12ft 6in | The same size using letters. |
| 12.5 | 12.5 decimal feet: the half foot is 6 inches. |
| 150" | 150 inches in total. |
| 3.81m | An explicitly metric length, converted for the feet field. |
Feet fields also accept inch fractions, such as 4½" or 12' 6 1/2", and metric suffixes such as cm and mm. In m mode, enter a numeric metre value instead, such as 3.81. Read the resulting value before moving on; the field's size limits still apply.
Keep the unit in your written brief
A screen setting does not fill in missing units in a message. Write “26 feet wide by 90 feet deep,” as in the townhouse example, rather than “26 by 90.” Use explicit units in revision requests too.
Understand labels and snapping
A 4-metre length displays as 13' 1", while the model remains exactly 4 metres. Most feet labels round to the nearest inch; short lengths below a foot can show half inches. Areas and volumes display whole square feet and cubic feet. The rounded label does not change the underlying measurement.
The grid uses 1-metre spacing in m mode and 1-foot spacing in ft mode. Existing objects stay in place when you switch; the new grid applies when drawing or moving them. Type a dimension when a grid point is too coarse. Read more about room sizes and snapping.
Keep your choice with the design
For a cloud design you own or can edit
Your choice saves with the design, including its first cloud save. Opening it on another device restores that preference. Other live sessions follow an owner or editor's change with a notice; if two people switch, the latest saved choice wins.
For a named viewer or unsaved scene
A named viewer can switch their own screen without saving that choice for everyone. Reopening follows the saved design preference. An unsaved scene uses this browser's choice. A public viewing link has no measurement labels or unit controls.
If a notice says the preference could not be saved, it can still be active on your screen. Check the notice before expecting another device to show the same unit. Learn how to save and share a design.
Choose the right units for a download
| Download | What to expect |
|---|---|
| PDF plan | Follows m or ft at export, including room dimensions, area labels, and the scale bar. The drawing scale stays a ratio such as 1:100. |
| Quantities TXT | Keeps metric figures and adds feet, square feet, and cubic feet equivalents in ft mode, under any regional practice. |
| JSON, GLB, DXF, IFC, Structure TXT, quantities CSV and change log | Remain metric. JSON does not carry your display preference; importing it keeps the unit already on screen. |
A quantities report already opened in chat keeps the units used when requested; ask for it again after switching. Some chat sentences and detailed warnings can also retain metric figures, so always read the unit beside a value.
Keep exploring
Try it with your own design
Open the studio and choose the measurements that feel familiar.
Back to Floor plan creator.