Put your floor plan on a page
A dimensioned PDF gives you a useful reference for discussing a home. Download the floors together, compare how the rooms connect, and keep a copy beside your brief.
Download the plan you want to discuss
Open the design and check that the latest changes are the ones you want to share. Choose Export → PDF → plan sheet (A3, dimensioned). The download contains one A3 landscape page per storey, beginning with the basement when there is one.
The PDF comes from the scene open in the editor, including your manual changes. You can export without an account. See current access and planned pricing for the wider offer.
Choose the units before downloading
The PDF follows the m or ft setting in the studio. Choose m for metres and square metres, or ft for feet, inches, square feet, and a scale bar in feet. Your choice changes the labels, not the size or shape of the drawing. Learn how to switch units.
Feet measurements are conversions rounded to the nearest inch. A row of rounded dimensions can differ from its rounded total by an inch; read the sheet's conversion note before treating that difference as a layout error.
Read the sheet in a useful order
Start with the floor and orientation
Check the level in the title block and follow the north arrow. The plan may turn a quarter turn to fit the paper better, so north is not always at the top of the sheet.
Look at the overall shape, then the rooms
The sheet shows the building outlines, doors and windows, door swings, room measurements, and overall and running dimensions. Furniture outlines help you relate the spaces to everyday use. In a design with an RC frame, columns and beam lines also appear.
For newly generated rooms, the room labels use inside measurements. Overall building dimensions describe the outside. Manually drawn rooms and older designs can use outer measurements in their labels; read the sheet's note and check a critical gap with the Measure tool. Understand room sizes and wall thickness.
Check the scale before printing
ChatHome.ai selects 1:50, 1:100, 1:200, or 1:500 so the floors fit at one shared scale and orientation. The scale is stated for A3 paper. Print at actual size on A3 if you want to use that printed scale, and check the scale bar if your printer resizes the page.
The scale ratios stay the same in both units. A feet-based PDF still uses an A3 sheet and a ratio such as 1:100; it does not switch to an inch-per-foot drawing scale.
Compare the floors together
The townhouse brief places shared living and a grandmother's suite downstairs, with bedrooms above. Use its floor-by-floor priorities as a review checklist: locate the rooms, then follow the stairs, landings, and doors between them.
Keep the pages together so their shared scale remains useful. If you revise the layout, export a fresh PDF and name the file for the option you intend to discuss.
Add elevations, sections, a foundation plan and framing plans with the drawing set
Choose Export → Drawing set when you also want to see the house from outside and cut through, and where its footings and frame stand. The drawing set opens with the same plan pages as the plan sheet, then adds four elevations, the front, back and both sides as seen from outside, one page with two sections: a long section through the stairs and a cross section, then a foundation plan and one framing plan for each floor that carries beams. Each page states its scale. The elevations, sections and the foundation plan can print at a smaller scale than the plans so that a tall or wide house fits the page, and the title block then names both scales, for example 1:200 with the plans at 1:100.
Elevations show the walls, doors, windows, roof, porches and balconies, with the ground line and the level of each floor. Sections show what the cut passes through, the walls, floors, roof and stairs, and draw what lies beyond it more lightly. The foundation plan shows the footings of the preliminary RC design under their columns, or the strip footings the structure report assumes for a brick house, and the framing plans show each floor's columns and beams with their grid labels; each of these pages says which it drew. They are preliminary drawings of the model as it stands, not construction documents: the footings and the frame are the preliminary design's, and nothing on them is engineered. Have an engineer check and complete the structure before anything is built.
Choose PDF or DXF for the next task
Choose PDF when someone needs a readable sheet to print. Choose DXF when they need the plan in CAD: the same outlines with every storey on its own layers, the door swings and window lines, and the dimension chains, in metres. The two overlay exactly.
PNG captures the visible plan or 3D view; it does not include the on-screen dimension labels. Use the PDF when those measurements are the point of the conversation.
Keep the sheet with the concept
This is a preliminary plan sheet, not a construction document. Its dimensions describe the model and need checking against the site before construction. For an irregular or rotated room, an overall width and depth may not describe its usable shape; inspect the room itself as well.
Send the sheet with the matching brief, selected views, and the questions you want to resolve. Prepare a useful handoff for your designer.
Keep exploring
Try it with your own design
Back to Export options.